Documentation cheat sheet¶
The documentation files use a mixture of Markdown and MyST syntax.
See the following sections for syntax help and conventions.
Headings¶
Input |
Description |
---|---|
|
Page title and H1 heading |
|
H2 heading |
|
H3 heading |
|
H4 heading |
... |
Further headings |
Adhere to the following conventions:
Do not use consecutive headings without intervening text.
Use sentence style for headings (capitalize only the first word).
Do not skip levels (for example, always follow an H2 with an H3, not an H4).
Inline formatting¶
Input |
Output |
---|---|
|
UI element |
|
|
|
command |
|
Italic |
|
Bold |
Adhere to the following conventions:
Use italics sparingly. Common uses for italics are titles and names (for example, when referring to a section title that you cannot link to, or when introducing the name for a concept).
Use bold sparingly. A common use for bold is UI elements ("Click OK"). Avoid using bold for emphasis and rather rewrite the sentence to get your point across.
Code blocks¶
Start and end a code block with three back ticks:
```
You can specify the code language after the back ticks to enforce a specific lexer, but in many cases, the default lexer works just fine.
Input |
Output |
---|---|
```
# Demonstrate a code block
code:
- example: true
```
|
# Demonstrate a code block
code:
- example: true
|
```yaml
# Demonstrate a code block
code:
- example: true
```
|
# Demonstrate a code block
code:
- example: true
|
To include back ticks in a code block, increase the number of surrounding back ticks:
Input |
Output |
---|---|
````
```
````
|
```
|
Links¶
How to link depends on if you are linking to an external URL or to another page in the documentation.
External links¶
For external links, use only the URL, or Markdown syntax if you want to override the link text.
Input |
Output |
---|---|
|
|
|
To display a URL as text and prevent it from being linked, add a <span></span>
:
Input |
Output |
---|---|
|
Internal references¶
For internal references, both Markdown and MyST syntax are supported. In most cases, you should use MyST syntax though, because it resolves the link text automatically and gives an indication of the link in GitHub rendering.
Referencing a page¶
To reference a documentation page, use MyST syntax to automatically extract the link text. When overriding the link text, use Markdown syntax.
Input |
Output |
Output on GitHub |
Status |
---|---|---|---|
|
{doc} |
Preferred. |
|
|
Do not use. |
||
|
Preferred when overriding the link text. |
||
|
{doc} |
Alternative when overriding the link text. |
Adhere to the following conventions:
Override the link text only when it is necessary. If you can use the document title as link text, do so, because the text will then update automatically if the title changes.
Never "override" the link text with the same text that would be generated automatically.
Referencing a section¶
To reference a section within the documentation (on the same page or on another page), you can either add a target to it and reference that target, or you can use an automatically generated anchor in combination with the file name.
Adhere to the following conventions:
Add targets for sections that are central and a "typical" place to link to, so you expect they will be linked frequently. For "one-off" links, you can use the automatically generated anchors.
Override the link text only when it is necessary. If you can use the section title as link text, do so, because the text will then update automatically if the title changes.
Never "override" the link text with the same text that would be generated automatically.
Using a target¶
You can add targets at any place in the documentation. However, if there is no heading or title for the targeted element, you must specify a link text.
Input |
Output |
Output on GitHub |
Description |
---|---|---|---|
|
(target_ID)= |
Adds the target |
|
|
{ref} |
References a target that has a title. |
|
|
{ref} |
References a target and specifies a title. |
|
|
|
Use Markdown syntax if you need markup on the link text. |
Using an automatically generated anchor¶
You must use Markdown syntax to use automatically generated anchors. You can leave out the file name when linking within the same file.
Input |
Output |
Output on GitHub |
Description |
---|---|---|---|
|
Do not use. |
||
|
Preferred when overriding the link text. |
Lists¶
Input |
Output |
---|---|
- Item 1
- Item 2
- Item 3
|
|
1. Step 1
1. Step 2
1. Step 3
|
|
1. Step 1
- Item 1
* Subitem
- Item 2
1. Step 2
1. Substep 1
1. Substep 2
|
|
Adhere to the following conventions:
In numbered lists, use
1.
for all items to generate the step numbers automatically.Use
-
for unordered lists. When using nested lists, you can use*
for the nested level.
Definition lists¶
Input |
Output |
---|---|
Term 1
: Definition
Term 2
: Definition
|
|
Tables¶
You can use standard Markdown tables. However, using the rST list table syntax is usually much easier.
Both markups result in the following output:
Header 1 |
Header 2 |
---|---|
Cell 1 Second paragraph cell 1 |
Cell 2 |
Cell 3 |
Cell 4 |
Markdown tables¶
| Header 1 | Header 2 |
|------------------------------------|----------|
| Cell 1<br><br>2nd paragraph cell 1 | Cell 2 |
| Cell 3 | Cell 4 |
List tables¶
```{list-table}
:header-rows: 1
* - Header 1
- Header 2
* - Cell 1
2nd paragraph cell 1
- Cell 2
* - Cell 3
- Cell 4
```
Notes¶
Input |
Output |
---|---|
```{note}
A note.
```
|
注釈 A note. |
```{tip}
A tip.
```
|
Tip A tip. |
```{important}
Important information
```
|
重要 Important information. |
```{caution}
This might damage your hardware!
```
|
注意 This might damage your hardware! |
Adhere to the following conventions:
Use notes sparingly.
Only use the following note types:
note
,tip
,important
,caution
Only use a caution if there is a clear hazard of hardware damage or data loss.
Images¶
Input |
Output |
---|---|
![Alt text](https://linuxcontainers.org/incus/docs/main/_static/tag.png)
|
|
```{figure} https://linuxcontainers.org/incus/docs/main/_static/tag.png
:width: 100px
:alt: Alt text
Figure caption
```
|
Adhere to the following conventions:
For pictures in the
doc
directory, start the path with/
(for example,/images/image.png
).Use PNG format for screenshots and SVG format for graphics.
Reuse¶
A big advantage of MyST in comparison to plain Markdown is that it allows to reuse content.
Substitution¶
To reuse sentences or paragraphs without too much markup and special formatting, use substitutions.
Substitutions can be defined in the following locations:
In the
substitutions.yaml
file. Substitutions defined in this file are available in all documentation pages.At the top of a single file in the following format:
--- myst: substitutions: reuse_key: "This is **included** text." advanced_reuse_key: "This is a substitution that includes a code block: ``` code block ```" ---
You can combine both options by defining a default substitution in reuse/substitutions.py
and overriding it at the top of a file.
Input |
Output |
---|---|
|
This is included text. |
|
This is a substitution that includes a code block: |
Adhere to the following convention:
Substitutions do not work on GitHub. Therefore, use key names that indicate the included text (for example,
note_not_supported
instead ofreuse_note
).
File inclusion¶
To reuse longer sections or text with more advanced markup, you can put the content in a separate file and include the file or parts of the file in several locations.
You cannot put any targets into the content that is being reused (because references to this target would be ambiguous then). You can, however, put a target right before including the file.
By combining file inclusion and substitutions, you can even replace parts of the included text.
Input |
Output |
---|---|
% Include parts of the content from file [../README.md](../README.md)
```{include} ../README.md
:start-after: <!-- Include start Incus intro -->
:end-before: <!-- Include end Incus intro -->
```
|
コンテナや仮想マシンの中で動作する完全なLinuxシステムに統一されたユーザーエクスペリエンスを提供します。 Incusは数多くの Linuxディストリビューションのイメージ(公式のUbuntuイメージとコミュニティにより提供されるイメージ)を提供しており、非常にパワフルでありながら、それでいてシンプルなREST APIを中心に構築されています。 Incusは単一のマシン上の単一のインスタンスからデータセンターのフルラック内のクラスタまでスケールし、開発とプロダクションの両方のワークロードに適しています。 Incusを使えば小さなプライベートクラウドのように感じられるシステムを簡単にセットアップできます。 あなたのマシン資源を最適に利用しながら、あらゆるワークロードを効率よく実行できます。 さまざまな環境をコンテナ化したい場合や仮想マシンを稼働させたい場合、あるいは一般にあなたのインフラを費用効率よく稼働および管理したい場合にはIncusを使うのを検討するのがお勧めです。
|
Adhere to the following convention:
File inclusion does not work on GitHub. Therefore, always add a comment linking to the included file.
To select parts of the text, add HTML comments for the start and end points and use
:start-after:
and:end-before:
, if possible. You can combine:start-after:
and:end-before:
with:start-line:
and:end-line:
if required. Using only:start-line:
and:end-line:
is error-prone though.
Tabs¶
Input |
Output |
---|---|
````{tabs}
```{group-tab} Tab 1
Content Tab 1
```
```{group-tab} Tab 2
Content Tab 2
```
````
|
Content Tab 1 Content Tab 2 |
Collapsible sections¶
There is no support for details sections in rST, but you can insert HTML to create them.
Input |
Output |
---|---|
<details>
<summary>Details</summary>
Content
</details>
|
DetailsContent |
Glossary¶
You can define glossary terms in any file. Ideally, all terms should be collected in one glossary file though, and they can then be referenced from any file.
Input |
Output |
---|---|
```{glossary}
example term
Definition of the example term.
```
|
|
|
More useful markup¶
Input |
Output |
---|---|
```{versionadded} X.Y
```
|
Added in version X.Y. |
|
API |
Custom extensions¶
The documentation uses some custom extensions.
YouTube links¶
To add a link to a YouTube video, use the following directive:
Input |
Output |
---|---|
```{youtube} https://www.youtube.com/watch?v=iMLiK1fX4I0
:title: Demo
```
|
The video title is extracted automatically and displayed when hovering over the link.
To override the title, add the :title:
option.
Spelling exceptions¶
If you need to use a word that does not comply to the spelling conventions, but is correct in a certain context, you can exempt it from the spelling checker by surrounding it with {spellexception}
.
Input |
Output |
---|---|
|
Terminal output¶
To show a terminal view with commands and output, use the following directive:
Input |
Output |
---|---|
```{terminal}
:input: command number one
:user: root
:host: vm
output line one
output line two
:input: another command
more output
```
|
root@vm:~# command number one output line one output line two root@vm:~# another command more output |
Input is specified as the :input:
option (or prefixed with :input:
as part of the main content of the directive).
Output is the main content of the directive.
To override the prompt (user@host:~$
by default), specify the :user:
and/or :host:
options.
To make the terminal scroll horizontally instead of wrapping long lines, add :scroll:
.